Radiant 8 inch Air Cooled Reflector Unit (includes lens)
The Radiant's generous reflective interior is designed to deliver the brightest possible light down to your plants, while its patented double-wall design makes it the coolest running fixture on the market. Its heavy duty pre-galvanized steel construction is lined with high purity European aluminum for years of dependable growing performance.
• Multi-faceted computer-designed aluminum interior for maximum efficiency
• Made from premium European materials: 99.85% pure with 95% reflectivity
• AC version includes 6" or 8" flanges that enable higher air flow for cooler temperatures and more reflectors in-line
Which SKU's apply to the Radiant reflector lens systems?
RDUNLENS - replacement lens for the current RDUN model with integrated hangers and built in lamp cord. The unit has side slots for the lens rather than a bracket system. lens only RDLENSYS contains (2) brackets and a lens specifically for the older model RDUN (Radiant) reflector. RDSLENSYS is the replacement lens only for the RD6AC and RD8AC reflector units.
My lamp, ballast and reflector combination is not working. How can I fix this?
For traditional mogul type lamp systems: The problem might be a bad connection in the mogul socket. Make sure to disconnect the unit from the power supply, and then look inside the mogul socket for a metal tab. Pry this tab upwards a little bit to make better contact with the bulb base. For double-ended type lamp systems: Improper seating/installation of the DE lamp is by far the most common reason for malfunctions with DE systems. Disconnect the lamp cord from the ballast and unplug the ballast's power cord from the power source, then check whether the lamp is properly seated in the lamp holders. Turn your reflector upside down so that the lamp and lamp holders are facing upward. Try sliding the lamp holders to their open position (outward), repositioning the lamp and the lamp's wire ends/leads, and then re-securing the lamp by sliding the lamp holders closed again (inward, toward the lamp). The lamp's wire leads must be fully seated in their slots before sliding the socket ends closed. If uncertain about how the lamp holders work, please refer to the photos provided in the instructions (available under the Product Info tab if needed). Wear gloves when handling the lamp to prevent fingerprints/skin oils from being left on it. If the lamp needs cleaning, use a soft dry cotton cloth to wipe off fingerprints or oils.