oxyCLONE 20 Site Cloning System

OX20SYS
$65.99

oxyCLONE 20 is a simple, compact, recirculating cloning system. It works with a variety of cuttings, allowing you to have a perpetual garden year-round. Now powered by Active Aqua's premium, BPA-free water and air pumps! The submersible pump delivers constant turbulence to your reservoir while the attached Venturi valve naturally draws in air bubbles. For maximum aeration, the single-outlet Active Aqua air pump provides a constant flow of dissolved oxygen through a circular 4" air diffuser. No other cloner delivers dissolved oxygen like the oxyCLONE! For tips and FAQs, please visit www.oxyclone.com.

Features:

  • Maximum oxygenation
  • Won't leak or clog
  • Evaporative cooling means less retained heat
  • Powered with Active Aqua premium pumps

oxyCLONE Cloning System from Hydrofarm – Introduction

How often should I change the hydroponic nutrient solution in my reservoir?

To ensure optimal nutrient availability and freshness, change reservoir solutions completely every 1 to 2 weeks. If needed, top off low reservoir levels with 1/4 strength nutrient solution or plain water.

How do I use my Grow Flow control bucket timer?

Each segment (or tab) around the clock face represents 15 minutes. A segment pulled away from the center of the clock is on Drain, and pushed toward the center is on Fill. Set all on Drain, then set one or two segments to Fill every few hours when you wan

Why is the "Switch Error" light on when I plug in the controller bucket?

First drain water from bucket. Make sure the uppermost black float switch (the overflow safety switch) is installed correctly. It should be straight, not bent, when at rest (no water in bucket). See diagram under the Files tab for details. Once installed